There is a new method for using Let’s Encrypt SSL certificates on Unifi Network and Unifi Cloud Keys (Gen 1 / Gen 2) while using

Use the Print Production tool.   Click Tools  Click More Tools (if you have this)  Click Use Print Production or Print Production  Click Preflight (wait

I use SCP to upload the files to /opt/vmpro/Wavs/CustomPrompts. I then use ssh as root to change the ownership and access permissions. cd /opt/vmpro/Wavs/CustomPromptschown vmpro:vmpro

By the power of a tweak, thou shall pass the dreaded MS16-087 and letters will be put on paper once again.You need to register at

cmd /c “reg add HKCUSoftwareClassesCLSID{86ca1aa0-34aa-4e8b-a509-50c905bae2a2}InprocServer32 /ve /d “” /f”

This was done using a raspberry pi 4 8gb. Click here for an Amazon search.   Type This, followed by Enter after each line:sudo suapt

Panasonic WV-X8571 rtsp:///MediaInput/h265?ch_2&stream_1 Advidia B-31 rtsp://[ipaddress]/

List your disks and find the partition you want lsblk -f Create the partition mkfs -t ext4 /dev/sdb1 Create a new folder to mount the

Run this and reboot: reg add HKLMSoftwareMicrosoftCryptographyProtectProvidersdf9d8cd0-1501-11d1-8c7a-00c04fc297eb /v ProtectionPolicy /t REG_DWORD /d 00000001

Extract and install the ipmi tool and run the commands below the link. http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=YF64X “C:Program Files (x86)DellSysMgtbmcipmitool.exe” -I lanplus -U root -P calvin -H 192.168.111.254